| Index Marine Waterproof Cable Glands
|
These cable glands meet the requirements of every type of electrical and electronic installation.
All models available in stainless steel, anodised aluminium or tough UV protected nylon. They are easy to install and create an effective barrier against the ingress of water.
Simply fitted to deck with self tapping screws. Full instructions, fixing screws, gaskets, seals and sealing cap included. |
|
Large Image | DG8 Series Cable Gland - For cables 2 - 8mm
Simply change the coloured rubber centre. The range has passed independent rigorous dust and waterproof testing to IP 68.
Dims: 12mm x 35mm dia - For cables 2-8mm.
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
| |
|
| |
|
Large Image | DG20 Series Cable Gland - Drill to size
Drill rubber centre to suit size of cable. The range has passed independent rigorous dust and waterproof testing to IP 68.
Dims: 19mm x 49mm dia
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
|
| |
|
|
Large Image | DG21 Split Seal Cable Gland - For cables 4.5 - 9mm
The DG21 glands have a tapered body and seal. The seal is slit between the outside and inside diameters to enable a cable with a fixed connector fitted, to be passed through the deck, without the need to cut the cable. The tapered seal ensures that the slit closes completely, creating a watertight seal round the cable. Ideal for VHF, Satnav, GPS and Radar.
Dims: 19mm x 49mm dia - For cables 4.5 - 9mm.
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
| |
|
| |
|
Large Image | DG22 Split Seal Cable Gland - For cables 9 - 14mm
The DG22 glands have a tapered body and seal. The seal is slit between the outside and inside diameters to enable a cable with a fixed connector fitted, to be passed through the deck, without the need to cut the cable. The tapered seal ensures that the slit closes completely, creating a watertight seal round the cable. Ideal for VHF, Satnav, GPS and Radar.
Dims: 19mm x 49mm dia - For cables 9 - 14mm.
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
|
| |
|
|
Large Image | DG30 Series Cable Gland - Drill to size
Drill rubber centre to suit size of cable. The range has passed independent rigorous dust and waterproof testing to IP 68.
Dims: 19mm x 60mm dia
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
| |
|
| |
|
Large Image | DG40 Series Cable Gland - Drill to size
Drill rubber centre to suit size of cable. The range has passed independent rigorous dust and waterproof testing to IP 68.
Dims: 19mm x 70mm dia
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
|
| |
|
|
Large Image | DG45 Split Seal Cable Gland - For cables 12 - 15mm
The DG45 glands have a tapered body and seal. The seal is slit between the outside and inside diameters to enable a cable with a fixed connector fitted, to be passed through the deck, without the need to cut the cable. The tapered seal ensures that the slit closes completely, creating a watertight seal round the cable. Ideal for VHF, Satnav, GPS and Radar.
Dims: 19mm x 70mm dia - For cables 12 - 15mm.
Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. |
| |
| |
|
| |
|
|
Large Image | DR1 Cable Gland
The DR1 cable gland allows you to create the size of holes you need through the 12.5mm diaphragm.
Stainless steel top and plastic base. - Instructions included
Size: L94 x W44 x H23mm
Aperture: 65 x 18.5mm |
| |
|
